setting up for output trannie bias current...
i installed the to 0.33 ohm resistors to have dog ears so i can clip test leads easily..
readings accross the resistors for 50mA idle current...
[img]https://fbcdn-photos-f-a.akamaihd.net/hphotos-ak-xpf1/v/t1.0-
0/p180x540/12278755_1031780743510226_4166161999399550472_n.jpg?oh=0259793f3b479eb21b5f38ae24402a7f&oe=56B81058&__gda__=1457739507_b0a3c35441fbff6dc715253b693e744e[/img]
final reading of 29 watts from an initial reading of 19 watts..
so that the output stage now dissipates 10 watts..
a look inside with the lid on...