Local Tubes and DIY Parts Sources

For the serious and not so serious in audio: DoItYourself and Tubes (SET, PP, Vintage).

Moderator: kabubi

Re: Local Tubes and DIY Parts Sources

Postby tony » Wed Dec 07, 2011 11:56 am

bosing214 wrote:how much po ba the cheapest project, single ended lang muna po try ko lang....and thanks po sa mga nag -reply


5k, 13fm7 pasok dyan......basa ka rito: http://www.electronicslab.ph/forum/inde ... ic=25478.0
User avatar
tony
Fanatic
Fanatic
 
Posts: 1882
Joined: Tue Jun 24, 2003 7:18 am
Location: Pasig City....

Re: Local Tubes and DIY Parts Sources

Postby bosing214 » Thu Dec 08, 2011 11:26 pm

Sir Tony,
tnx a lot for giving more info.sa totoo lang po i have no idea about vacuum tube familiar kc ako sa transistorized amplifier, sundan kita sir sa sight na post mo.
bosing214
Newbie
Newbie
 
Posts: 13
Joined: Sun Dec 04, 2011 7:48 pm

Re: Local Tubes and DIY Parts Sources

Postby Quiel » Tue Jun 26, 2012 8:51 am

saan kaya maka source nang aluminum plates, 1/2 inch thick (or bit thinner). mga 10 x 15". Need a pair for baffle project. So far, Royal Bender wala daw ganung material. Salamat.
User avatar
Quiel
Citizen
Citizen
 
Posts: 955
Joined: Tue Feb 25, 2003 5:33 pm

Re: Local Tubes and DIY Parts Sources

Postby edrel sison » Tue Jun 26, 2012 1:19 pm

Quiel wrote:saan kaya maka source nang aluminum plates, 1/2 inch thick (or bit thinner). mga 10 x 15". Need a pair for baffle project. So far, Royal Bender wala daw ganung material. Salamat.


i think i have that in my factory but i do not cut. you need to find someone who can do the precise cutting. send me pm if interested :)
edrel sison
Citizen
Citizen
 
Posts: 982
Joined: Tue Nov 02, 2004 2:37 pm

Re: Local Tubes and DIY Parts Sources

Postby Quiel » Wed Jun 27, 2012 10:16 am

edrel sison wrote:
Quiel wrote:saan kaya maka source nang aluminum plates, 1/2 inch thick (or bit thinner). mga 10 x 15". Need a pair for baffle project. So far, Royal Bender wala daw ganung material. Salamat.


i think i have that in my factory but i do not cut. you need to find someone who can do the precise cutting. send me pm if interested :)


Yehey. THANK YOU. PM sent.
User avatar
Quiel
Citizen
Citizen
 
Posts: 955
Joined: Tue Feb 25, 2003 5:33 pm

Re: Local Tubes and DIY Parts Sources

Postby tony » Fri Jun 29, 2012 7:42 am

Quiel wrote:saan kaya maka source nang aluminum plates, 1/2 inch thick (or bit thinner). mga 10 x 15". Need a pair for baffle project. So far, Royal Bender wala daw ganung material. Salamat.


Sulimco metals, corner cm recto street, and buenabidez in binondo area, they can cut to size, they even have 25mm plates....

me cantact info ka ng royal bender? ano services nila?
User avatar
tony
Fanatic
Fanatic
 
Posts: 1882
Joined: Tue Jun 24, 2003 7:18 am
Location: Pasig City....

Re: Local Tubes and DIY Parts Sources

Postby Quiel » Sat Jul 28, 2012 7:33 pm

tony wrote:
Quiel wrote:saan kaya maka source nang aluminum plates, 1/2 inch thick (or bit thinner). mga 10 x 15". Need a pair for baffle project. So far, Royal Bender wala daw ganung material. Salamat.


Sulimco metals, corner cm recto street, and buenabidez in binondo area, they can cut to size, they even have 25mm plates....

me cantact info ka ng royal bender? ano services nila?


Thanks Tony.

Royal Bender: pag napadaan ako, kunin ko para sa you. Services based sa nakita ko: bending of tubes, stainless metal fabrication (railings, holders, racks), kasama na din pag manufacture nung containers at mga roof gutters.
User avatar
Quiel
Citizen
Citizen
 
Posts: 955
Joined: Tue Feb 25, 2003 5:33 pm

Re: Local Tubes and DIY Parts Sources

Postby oyiedelapaz » Mon Oct 08, 2012 11:38 pm

Bro san yung royal bender? Di ko magoogle eh :rofl:
oyiedelapaz
Newbie
Newbie
 
Posts: 5
Joined: Mon Oct 08, 2012 11:15 pm

Re: Local Tubes and DIY Parts Sources

Postby AAudio » Fri Oct 19, 2012 6:09 pm

Hello sirs,

May nakaka-alam po ba ng contact number ni John Poscablo

Thanks
AAudio
Citizen
Citizen
 
Posts: 85
Joined: Mon Jul 23, 2007 6:59 pm

Re: Local Tubes and DIY Parts Sources

Postby endrik35 » Fri Oct 19, 2012 9:22 pm

AAudio wrote:Hello sirs,

May nakaka-alam po ba ng contact number ni John Poscablo

Thanks


09228277301. Or pm juan bote of pDVD. That's his handle:-)
User avatar
endrik35
Fanatic
Fanatic
 
Posts: 1233
Joined: Thu Jul 16, 2009 11:18 pm

Re: Local Tubes and DIY Parts Sources

Postby AAudio » Sun Oct 21, 2012 8:55 pm

thanks sir endrik
AAudio
Citizen
Citizen
 
Posts: 85
Joined: Mon Jul 23, 2007 6:59 pm

Re: Local Tubes and DIY Parts Sources

Postby Ponggoy » Tue Nov 05, 2013 11:58 pm

Hello Bros, naghahanap ako ng 12X4 para sa rectifier ng PAS3, baka may alam kayong source. Salamat
Ponggoy
Newbie
Newbie
 
Posts: 11
Joined: Thu Apr 26, 2012 3:33 pm

Re: Local Tubes and DIY Parts Sources

Postby tony » Wed Nov 06, 2013 6:44 am

Ponggoy wrote:Hello Bros, naghahanap ako ng 12X4 para sa rectifier ng PAS3, baka may alam kayong source. Salamat


try mo kay Gerry Sta MaRIA, 5237551, or sa Watson sa Raon, Pacific Electronics malapit sa deeco...
User avatar
tony
Fanatic
Fanatic
 
Posts: 1882
Joined: Tue Jun 24, 2003 7:18 am
Location: Pasig City....

Re: Local Tubes and DIY Parts Sources

Postby Ponggoy » Wed Nov 06, 2013 10:28 pm

Salamat Bro.
Ponggoy
Newbie
Newbie
 
Posts: 11
Joined: Thu Apr 26, 2012 3:33 pm

Re: Local Tubes and DIY Parts Sources

Postby marcoharder » Wed Sep 16, 2015 1:13 pm

Where can I find axial electrolytics, octal sockets, and other tube amp hardware? I'm currently restoring some guitar amps kasi. Salamat!
marcoharder
Citizen
Citizen
 
Posts: 77
Joined: Thu Dec 14, 2006 11:35 am

Previous

Return to DIY and Tubes

Who is online

Users browsing this forum: No registered users and 4 guests