iPod, walkman, headphones, earphones, boomboxes, etc...
Moderator: dogears
by Donlovejoy » Thu Oct 02, 2014 3:45 pm
I'm planning to buy a beyerdynamic custom one pro headphone to be mated with a Bravo Audio V3 Headphone Tube amplifier
Bravo Audio V3 Headphone Tube amplifierTechnical Specifications:
Input Power: DC24V
Input Sensitivity: 100mV
Input Impedance: 100KOhm
Output Impedance: 20~600 Ohm
Gain: 30dB
Frequency response: 10Hz-60KHz +/- 0.25dB
Signal/Noise Ratio: >90dB
Dynamic range: 84.6dBA(300 ohm) 89.8dBA(33 ohm)
THD: 0.016%(300 ohm) 0.45%(33 ohm)I
MD + Noise: 0.045(300 ohm) 0.42(33ohm)
beyerdynamic custom one pro Technical Specifications:
Transducer type: dynamic
Operating principle: closed
Nominal frequency response: 5-35.000Hz
Nominam impedance: 16ohm
Nominal SPL: 96dB
Max SPL: 116dB
T.H.D: <0.2%
Power handling capacity: 100mW
Ambient noise attenuation: approx. 18dBA
The beyerdynamic custom one pro has a nominal impedance of 16 ohms whereas Bravo Audio V3 Headphone Tube amplifier has Input Impedance: 100KOhm
Output Impedance: 20~600 Ohm, is this a matched pair? Any problems?
-
Donlovejoy
- Citizen
-
- Posts: 323
- Joined: Wed Mar 31, 2004 4:25 pm
- Location: Quezon City
by Donlovejoy » Fri Oct 17, 2014 10:32 am
Donlovejoy wrote:I'm planning to buy a beyerdynamic custom one pro headphone to be mated with a Bravo Audio V3 Headphone Tube amplifier
Bravo Audio V3 Headphone Tube amplifierTechnical Specifications:
Input Power: DC24V
Input Sensitivity: 100mV
Input Impedance: 100KOhm
Output Impedance: 20~600 Ohm
Gain: 30dB
Frequency response: 10Hz-60KHz +/- 0.25dB
Signal/Noise Ratio: >90dB
Dynamic range: 84.6dBA(300 ohm) 89.8dBA(33 ohm)
THD: 0.016%(300 ohm) 0.45%(33 ohm)I
MD + Noise: 0.045(300 ohm) 0.42(33ohm)
beyerdynamic custom one pro Technical Specifications:
Transducer type: dynamic
Operating principle: closed
Nominal frequency response: 5-35.000Hz
Nominam impedance: 16ohm
Nominal SPL: 96dB
Max SPL: 116dB
T.H.D: <0.2%
Power handling capacity: 100mW
Ambient noise attenuation: approx. 18dBA
The beyerdynamic custom one pro has a nominal impedance of 16 ohms whereas Bravo Audio V3 Headphone Tube amplifier has Input Impedance: 100KOhm
Output Impedance: 20~600 Ohm, is this a matched pair? Any problems?
This did not push thru what i got instead:
Sennheiser HD 598
FiiO E12
-
Donlovejoy
- Citizen
-
- Posts: 323
- Joined: Wed Mar 31, 2004 4:25 pm
- Location: Quezon City
Return to Head-Fi
Who is online
Users browsing this forum: No registered users and 2 guests