POWER AMPLIFIERS9084D Mono block 20w/ch SET The unique circuit concept of the 9084D monoblocks makes it a benchmark in single ended amplification technology. With the legendary 300B tube driving the 845-High-Power-Triode to an amazing 28 watts, the 9084D provides a riveting performance that will leave your breathless.
Specs:
Power Output : 28W
Frequency Response : 18Hz ~ 30kHz
Total Harmonic Distortion : 2% (1kHz)
Input Sensitivity : 1000 mV
Input Impedance : 100k ohms
Output Impedance : 4 ohms, 8 ohms, 16 ohms
S/N Ratio : 85dB
Tubes : 845x1, Full music 300Bx1, 6N8P (6SN7)x1, 6N9P (6SL7)x1
Dimension : 510 x 270 x 260mm
Weight : 31.5kg
Power Consumption : 160W+160W
SRP: 280,0009085D Mono blockSPECIFICATIONS
Power Output: 40W ( RMS )
Frequency response: 20Hz~22kHz
THD: 2% (1kHz)
S/N ratio: 80dB
Input sensitivity: 750mV
Input impedance: 100kΩ(RCA)
Output impedance: 4Ω,8Ω,16Ω
Power requirement: AC 230V±5%, 50~60Hz
Tube complement: V1: 6N9P/6SL7
V2: 300B
V3: 805
Weight: 38kg
Dimension: 300×280×460mm (W×H×D)
Power consumption: 230W
SRP: 325,0009088D Mono block 60w/chanelThe Cayin 9088D is the statement, reference, tube mono block amplifier. The tube compliment consists of (2) 845, (1) 300B and (1) 6SL7. Cayin chose the 845 tube due to its dynamic, luscious, warm, rich, textured sound. This amp not only can drive the most stubborn speakers, they retain the characteristic sound of Cayin. A key feature is the use of Transformer Coupling, which renders a more direct and realistic sound as opposed to the traditional capacitor coupling found in inexpensive amplifiers. These Cayin 9088 mono amps are hand built and feature point-to-point wiring. Each of these monsters weighs in at over 68 pounds. This is classic, heavy-duty tube gear.
SRP: 400,000SP SERIESSP105i AM/FM/SW RadioThere are quite a few nostalgic radios on the market today. This one is basically different. It’s not that kind of superficial retro design filled with nowadays-common highly integrated stuff. It still keeps the promise made by the solid old-fashioned case with intense use of aluminium and wood veneer. It’s really powered by valves and sounds great like yesterday’s golden tunes. It has high power (10 Watts!) and a big 12,5 cm driver, which sounds rich and controlled, supported by the big and stiff cabinet. It even has a headphone connector for quiet listening.
And there’s a lot to listen to: FM, AM, SW 1 and SW 2. So there is no limit for shortwave DXing. It’s really a kind of world radio which can also be connected to your Hi-Fi system by using the integrated RCA line output.
Technical specification
Tuning bandwidth FM: 87 - 108 MHz
Tuning bandwidth AM: 510 - 1620 kHz
Tuning bandwidth SW1: 4.4 - 12.0 MHz
Tuning bandwidth SW2: 12.0 - 22.0 MHz
Sensivity FM: Better than 5 μV
Sensivity AM: Better than 0.5 mV
Sensivity SW: Better than 30 μV
speaker: 5 inch Full range bass reflex
Tube complement: 2x EL84
OVERALL DIMENSIONS (W x H x D): 420 x 240 x 240 mm
Weight: 15 kg
Headphone out: 4 Ω - 300 Ω
External FM antenna resistance: 75 Ω
External AM / SW antenna resistance: 300 Ω
Frontplate: Brushed aluminum
Output power(RMS): 10 Watts
SRP: 27,000SP-CD300This CD-Player blends the latest digital technology with a traditional valve output stage. Burr Brown manufactures the D/A converters of the type 1792 which are known for fine resolution. The famous German Hi-Fi reviewer Johannes Maier from “stereoplay” expressed his admiration about the sophisticated construction of the Cayin SP-CD300. It even has a kind of siren sound preventing children from playing around with the nice rocker switches.
The SP-CD300 matches the style of the integrated amplifier SP-10A and has balanced XLR-inputs for safe signal transmission. If you prefer the RCA connection, the transformers of the CD-Player will isolate the circuit against ground noise.
For controlling the whole SP Series with one remote, you can use the system controller – a piece of metal with wooden side panels that pleases the eye.
The sound of the SP-CD300 is really like you would expect it from a traditional valve component: It’s warm, rich and smooth like a good vintage vine.
Technical specification: CD-Player
Frequency response: 20Hz - 20kHz +/- 0,5dB
Distortion and noise: <- 60dB
Signal-to-noise ratio: 90dB
Output level: 2V+/-3dB
Channel Separation: 90dB
Dynamic range: 100dB
Accessories: Remote Control
Output terminals: RCA unbalanced, transformer balanced output
Output terminals: unbalanced, Digital Cinch
Colour: Piano laquer, cherry, walnut
Colour front: black, silver
Consumption: 20 W
Weight: 10kg
Dimensions W x H x D: 400 x 125 x 330mm
SRP: 55,000SP-10A Integrated AmpThere are lots of retro Hi-Fi components today. But this one is different. Instead of only copying the design of the 60ties and 70ties, the SP-10A also sounds like amplifiers used to sound at that time: rich, smooth and warm. Small wonder, it still uses the same basic technology with four 6L6 power valves in the output stage.
The press was impressed by that smart combination of traditional values and traditional craftsmanship. Renowned German reviewer Johannes Maier remarked in his testreport in “stereoplay 5/08”, that the whole construction is well designed from the gold plated inputs through the circuit layout to the solid copper speaker terminals.
A class of it’s own is the remote made of aluminium with fine wooden side panels. It not only controls the amplifier, but also the CD-Player SP-CD300.
Technical specification: Integrated Amplifier
Frequency response: 15 Hz - 35 kHz
Total harmonic distortion (THD):1 % (1 kHz)
Signal-to-noise ratio: 85dB
Input sensitivity: 470mV
Vacuum tube: 4x 6L6, 2x 12AU7, 1x 12AX7
Accessories: Remote Control
Input Terminals: CD, Line 1, Line 2, Line 3
Circiut: Class AB PP
Colour: Piano laquer, cherry, walnut
Colour front: silver
Output Impedance: 4 Ohm, 8 Ohm
Power Output: 2 x 30 Watt @ 8 Ohm
Weight: 20kg
Dimensions W x H x D: 400 x 180 x 329mm
SRP: 72,000SP-30S Pre-amp with Phono StageBesides using the integrated amplifier SP-10A that was praised by the press, you can build up a more flexible system with the separate pre amplifier Cayin SP-30S. So you keep all benefits of the traditional style in sound and design, but can drive more critical speakers with more power than the main amp Cayin SP-40M is capable. The pre amp can be controlled with the very attractive system remote made of aluminium and wood to reflect the design of the whole SP range. The sound is as classical as the retro look – a well-balanced reminiscence to the golden age of Hi-Fi.
Technical specification: Tube Preamplifier
Frequency range: 5 Hz -150 kHz +/-1dB
Total harmonic distortion (THD): 0,15% (1kHz)
Input Impedance (Circuit Amplifier): 47 kohm
Input sensitivity (Circuit Amplifier): 350mA
Signal-to-noise ratio (Circuit Amplifier): 98 dB
Input Impedance (Phono MM): 47 kohm
Input sensitivity (Phono MM): 3 mA
Signal-to-noise ratio (Phono MM): 68 dB
Output level: 2 V (15V Max.)
Vacuum tube: 2 x 12AU7, 1 x 12AX7
Features: Remote Control
Input Terminals: Phono, CD, Tuner, Tape
Output terminals: Pre-out, rec.out
Body colour: piano laquer, cherry, walnut
Front plate: silver
Weight: 10kg
Dimensions (W x H x D): 400 x 125 x 329mm
SRP: 75,000SP-40M Stereo AmpThis power amp matches the pre amplifier Cayin SP-30S from the concept and design. If you think you need more power or flexibility than our integrated amp can provide, you should have a close look at that one: it boosts 40 watts x 2, which is more than sufficient to drive most speakers. This power output is archived by a larger mains transformer and a combination of four KT88-EH, one 12AX7 and two 12AU7 valves. The whole design is simple, but straight: the 20-kilo component is available with different wooden cabinets accompanied by a heavy aluminium front. The sound reflects the classical appearance of the SP series and reminds of a time when valve components weren’t analytical at all.
Frequency response: 15 Hz ~ 35 kHz
Total harmonic distortion (THD): 1% (1kHz)
Signal-to-noise ratio: 89 dB
Vacuum tube: 4 x KT88 EH, 1 x 12AX7, 2 x 12AU7
Input Terminals: 2 Inputs A/B RCA
Output terminals: Speaker 4 and 8 Ohms
Colour: piano laquer, cherry, walnut
Colour front: silver
Input sensitivity: 600 mV
Output Impedance: 4 Ohm, 8 Ohm
Power Output: 2 x 40 Watt (RMS, 8 Ohms)
Weight: 20kg
Dimensions W x H x D: 400 x 180 x 329 mm
SRP: 65,000SP-20M Mono block 8w/chSPECIFICATIONS
Output power: 8W (RMS, 8Ω)
Frequency response: 20Hz~35kHz
THD: 2% (1kHz)
S/N ratio: 85dB
Input sensitivity: 520mV
Input impedance: 100KΩ
Output impedance: 4Ω,8Ω
Dimension: 329mm×213mm×230mm
Tube: 6SN7×1, 5AR4X1, 300B × 1
Weight: 13kg
Power consumption: 100W
SRP: 180,000