classic analog rigs Thorens, Garrard, Lenco, EMT, etc..
Moderators: setup1, setup2
by audiophileman2002 » Wed Oct 12, 2005 4:59 am
Hi Amplifine,
I'm not so sure as where leaf springs can be sourced. Most Thorens have coil springs. There is a German company that makes springs for the 100 series and metal pulleys for the 100 and 300 series. Their website is:
http://www.phonosophie.de
Check that out.
-
audiophileman2002
- Fanatic
-
- Posts: 1543
- Joined: Tue Sep 28, 2004 10:11 am
- Location: Clarksville, MD 21029
by Amplifine » Thu Oct 13, 2005 3:15 pm
thanks
-
Amplifine
- Citizen
-
- Posts: 403
- Joined: Thu May 27, 2004 8:53 am
- Location: Sta. Rosa
-
by conspicuous » Mon Oct 17, 2005 4:37 pm
Amplifine wrote:thanks
amplifine, have you tried sensible audio in MCS? supposedly they are the distributor of thorens here in manila. however, i sourced belt from hypertriode for my thorens 166.
-
conspicuous
- Fanatic
-
- Posts: 2258
- Joined: Tue Oct 05, 2004 1:33 pm
- Location: San Pedro, Laguna
by Amplifine » Mon Oct 17, 2005 6:33 pm
Yes I tried Lito. He has a belt but no springs
-
Amplifine
- Citizen
-
- Posts: 403
- Joined: Thu May 27, 2004 8:53 am
- Location: Sta. Rosa
-
by audiophileman2002 » Mon Oct 17, 2005 7:52 pm
Have you re-lubed, Amplifine? Suggest you remove the sub platter bearing and clean the well and put new oil. There are many thoughts on the type of oil. Some use molybdenum grease as the spindle bearing is not exactly tight fit on the Thorens. Some use Mobil One. Others use SAE 40 motor oil while some use ordinary Singer Sewing Machine oil. Take your pick. I use the same oil I use for my VPI which I sourced from VPI.
As far as the belt goes, it must not be tight as if it is it will cause some noise as the spindle will rub against the well too much. Got to make sure it is really the right length of belt.
-
audiophileman2002
- Fanatic
-
- Posts: 1543
- Joined: Tue Sep 28, 2004 10:11 am
- Location: Clarksville, MD 21029
Return to IDLER TURNTABLES
Who is online
Users browsing this forum: No registered users and 2 guests