Page 21 of 26

Re: B&C compression drivers for DIY enthusiast

PostPosted: Sun Feb 19, 2012 10:54 pm
by m adkins
guys,

I have available B&C compression drivers and woofers for our DIY projects.

please PM me if anyone is interested, i can send our brochure and price lists

partial models on stock are the following:

B&C DE250 1" throat compression driver
B&C DE610 1.4" throat compression driver
B&C DE750 2" throat compression driver
B&C DE35 bullet tweeter neo magnet
B&C 12PLB76 12" woofer high efficiency
B&C 15HPL76 15" neo magnet woofer.
B&C 6MDN 44 6" midrange driver w/ neo magnet

B&C components are being used by hi-end big name professional audio manufacturers such as QSC throughout their line including cinema speakers, also being used by EAW, Renkus Heinz, Nexo, FBT, Martin Audio, L Acoustics etc...

Re: another midhorn in the making

PostPosted: Tue Feb 28, 2012 2:01 pm
by camotecue
posting on behalf of tito (jewrete of ws).

le cleach horn+onken system in its new location at his home

Image

thanks for looking!

Re: another midhorn in the making

PostPosted: Tue Feb 28, 2012 2:05 pm
by Superman
Congratulations! :D

another midhorn in the making

PostPosted: Tue Feb 28, 2012 3:59 pm
by dnk
Mr. Roxas is quite busy nowadays a! I wonder what else is cooking. congrats to both the maker and the owner.

Re: another midhorn in the making

PostPosted: Wed Feb 29, 2012 1:50 pm
by camotecue
dnk wrote:Mr. Roxas is quite busy nowadays a! I wonder what else is cooking. congrats to both the maker and the owner.


not too busy. that is why we accepted this repair of a pair of B&W 802 speakers damaged by flashflood from the recent sendong tragedy.

pictures of the damaged speakers
Image

Image

Image

Image

Image

the innards expanded causing the front baffle to detach from the sides. backside also detached from each other.

pictures of the repaired speaker to follow.

Re: another midhorn in the making

PostPosted: Thu Mar 08, 2012 9:26 am
by bangyay
Tapos na ba itong B&W na to? Saw this when I visited your shop. Thanks for accommodating me last time. Will call you later...

Re: another midhorn in the making

PostPosted: Tue Apr 03, 2012 9:55 am
by camotecue
Inspired by carbondated's horn speakers, just finished the partner to Mr. D's L 75:

Image

With Le Cleac'h 800hz horns in wenge finish and with the following components: Altec GPA 414, 802 compression drivers and not shown are the 075 jbl bullet tweeters. Baffle is made from Narra laminated with 1-1/2" thick imported marine ply. Cabinet is made from the same 1-1/2" thk. ply, solid as a rock!

Thanks for looking!

Re: another midhorn in the making

PostPosted: Tue Apr 03, 2012 10:04 am
by TheAnalogSource
GANDA!!!! just what i wanted, a small footprint horn speaker....hmmm :?: :?: :?: :?:

Re: another midhorn in the making

PostPosted: Tue Apr 03, 2012 10:18 am
by camotecue
TheAnalogSource wrote:GANDA!!!! just what i wanted, a small footprint horn speaker....hmmm :?: :?: :?: :?:


Thanks bro. No crossover yet since Mr. D is still contemplating whether to go the passive or active route.

Re: another midhorn in the making

PostPosted: Tue Apr 03, 2012 10:22 am
by lovejbl
camotecue wrote:
TheAnalogSource wrote:GANDA!!!! just what i wanted, a small footprint horn speaker....hmmm :?: :?: :?: :?:


Thanks bro. No crossover yet since Mr. D is still contemplating whether to go the passive or active route.


for that investment I highly suggest to go active. regards lovejbl

Re: another midhorn in the making

PostPosted: Tue Apr 03, 2012 10:42 am
by Superman
camotecue wrote:Inspired by carbondated's horn speakers, just finished the partner to Mr. D's L 75:

Image

With Le Cleac'h 800hz horns in wenge finish and with the following components: Altec GPA 414, 802 compression drivers and not shown are the 075 jbl bullet tweeters. Baffle is made from Narra laminated with 1-1/2" thick imported marine ply. Cabinet is made from the same 1-1/2" thk. ply, solid as a rock!

Thanks for looking!


Congratulations!

Re: another midhorn in the making

PostPosted: Tue Apr 03, 2012 10:46 am
by Jon Agner
camotecue wrote:Inspired by carbondated's horn speakers, just finished the partner to Mr. D's L 75:

Image

With Le Cleac'h 800hz horns in wenge finish and with the following components: Altec GPA 414, 802 compression drivers and not shown are the 075 jbl bullet tweeters. Baffle is made from Narra laminated with 1-1/2" thick imported marine ply. Cabinet is made from the same 1-1/2" thk. ply, solid as a rock!

Thanks for looking!


Ganda Larry :clap: :clap: :clap: :clap: :clap: :clap:

Re: another midhorn in the making

PostPosted: Tue Apr 03, 2012 11:28 am
by camotecue
jon and jen,

Thanks!

Re: another midhorn in the making

PostPosted: Tue Apr 03, 2012 12:42 pm
by dnk
Another quality piece, Larry!

Congrats too Mr. Dy! I wonder what his relation to Noly is... hehe

Re: another midhorn in the making

PostPosted: Tue Apr 03, 2012 1:29 pm
by carbondated
camotecue wrote:Inspired by carbondated's horn speakers, just finished the partner to Mr. D's L 75:

Image

With Le Cleac'h 800hz horns in wenge finish and with the following components: Altec GPA 414, 802 compression drivers and not shown are the 075 jbl bullet tweeters. Baffle is made from Narra laminated with 1-1/2" thick imported marine ply. Cabinet is made from the same 1-1/2" thk. ply, solid as a rock!

Thanks for looking!


The long lost twin brothers of my guys! :)

Re: another midhorn in the making

PostPosted: Tue Apr 03, 2012 1:31 pm
by camotecue
The speaker's are actually push-pull type :D . They have hidden rollers at the bottom.

Re: another midhorn in the making

PostPosted: Tue Apr 03, 2012 2:44 pm
by camotecue
Another view and with grills on.

Image

Re: another midhorn in the making

PostPosted: Tue Apr 03, 2012 6:11 pm
by trod93
Very nice!!! :clap: :clap: :clap:

Re: another midhorn in the making

PostPosted: Tue Apr 03, 2012 7:15 pm
by camotecue
Thanks tony. Tapos na ba pang-challenge?

Re: another midhorn in the making

PostPosted: Tue Apr 03, 2012 7:43 pm
by obi
congrats sir lin on another masterpiece! :clap:

congrats to the owner as well :clap: