camotecue wrote:Thanks tony. Tapos na ba pang-challenge?
Almost done pre. Konting tweaking na lang at ipapasa ko na ang problema kay tukayo.
Moderator: Hyperion
camotecue wrote:Thanks tony. Tapos na ba pang-challenge?
lovejbl wrote:camotecue wrote:TheAnalogSource wrote:GANDA!!!! just what i wanted, a small footprint horn speaker....hmmm
Thanks bro. No crossover yet since Mr. D is still contemplating whether to go the passive or active route.
for that investment I highly suggest to go active. regards lovejbl
carbondated wrote:Well, I can vouch for these speakers using a passive crossover. I wasn't keen on using a digital crossover because of the signal would go into the digital domain and then back to analogue again, but that's just me
Larry, is that a port for the bass enclosure that you've added?
bangyay wrote:
I would really like to go active with this one but budget and time contraints do not allow this at this time. I've posted on another thread a plea for help... if someone is willing to lend me two amps and a preamp, plus a digital crossover, I'd really appreciate it. Desmo, I believe has offered to lend me his unused preamp, plus AbadSantos 7 has also offered his SET 2A3 (but it needs checking and is in Pampanga).... I would also be needing a digital crossover... haay...
At least ma-try ko man lang marinig sana ang speakers before ako magpagawa ng 2A3 ko sa mga masters dito.
Salamat.
camotecue wrote:For a member from the South. Another onken box for Altec 416 woofers. Horns to be used are original altec horns for large format drivers. Horns shall fit exactly the front profile (arc) of the box. Solid narra laminate on 1-1/2" thk. baffle. Side and top panels are made also from 1-1/2" thick marine ply. More or less 100 kilos per box. No problem, however, in moving the cabinets since they have hidden rollers. Top and sides are wenge stained. Cloth grilles are Lin Gomez-inspired.
I will post more pictures once the horns are in place.
Thanks for looking.
Audiohardware wrote:Ganda naman nyan sir
endrik35 wrote:Gorgeous woodworks Sir Larry! ORGASMIC to say the least! Dream ko yan and to have a bigger music room! Congrats and more power!
Tjaderman wrote:Salamat po!
camotecue wrote:For a member from the South. Another onken box for Altec 416 woofers. Horns to be used are original altec horns for large format drivers. Horns shall fit exactly the front profile (arc) of the box. Solid narra laminate on 1-1/2" thk. baffle. Side and top panels are made also from 1-1/2" thick marine ply. More or less 100 kilos per box. No problem, however, in moving the cabinets since they have hidden rollers. Top and sides are wenge stained. Cloth grilles are Lin Gomez-inspired.
I will post more pictures once the horns are in place.
Thanks for looking.
quarterback wrote:Hi Larry,
What's the foot print of these speakers?
Thanks!
Users browsing this forum: No registered users and 3 guests