POWERED SUBWOOFER - B&W ASW-300

[hypertriode]

Pre-owned Black ash finish. Brand new SRP is P23,000, selling for P9,500 only!

A compact active subwoofer designed specifically to complement 300 Series models, the ASW300 features a 200mm (8 in) driver having an extremely rigid cone, to withstand the large forces generated by dynamic bass signals. Its output is reinforced by a down-firing Flowport, B&W's familiar dimpled port design that reduces turbulence noise to negligible levels.

The 100W amplifier is more than powerful enough for the smaller room. Should some exceptionally loud signal threaten overload, the normal annoying distortion effects are tamed by our Bass Overload Suppression System circuitry.

The ASW300 accepts line level and speaker level inputs and has a choice of equalisation, enabling the response to be tailored to your room.

Technical Specifications : ASW 300
Description Active vented-box subwoofer system
Dimensions Height: 405mm (16 in) including fixed feet
Width: 330mm (13 in)
Depth: 375mm (14.8 in) including grille and controls
Allow extra 50mm (2 in) clearance at rear for ventilation
Net Weight 15kg (33 lb)
Freq. Response -3dB 27Hz - 150Hz adjustable (EQ at A)
Freq. Range -6dB at 27Hz and 180Hz adjustable (EQ at A)
Drive Units Unit 1: 1x 200mm (8 in) dia paper/Kevlar cone long throw
Unit 2:
Unit 3:
Finish Cabinet: Black Ash or Maple vinyl
Grille: Black cloth
Sub Woofer Amplifier Description: Class B
Power Output: 100W continuous
Rated Power Consumption: 140W
Input Impedance: 22k ohms
Signal Noise: >90dB
Functions: Volume level - Low-pass filter frequency - Low-pass filter bypass - Bass roll-off alignment - Auto sense on/standby - Phase 0/180
Inputs: Line In (RCA Phono)
Speaker level In (binding posts)
Outputs: Line Out (RCA Phono, high-passed)
Link Out (RCA Phono, parallel to Line In)
Speaker level out (binding posts, high-passed)
Low Pass Filter Active 2nd-order, variable cut-off frequency
High Pass Filter Line level: Active 3rd-order at 80Hz
Speaker level: Passive 1st-order at 80Hz into 8 ohm resistor
(Response of passive filters dependent on load impedance)[/b]

[conspicuous]

bro, still available? pls reserve.

[hypertriode]

bro, still available? pls reserve.

reserved for conspicuous!