Moderator: dante
Jon Agner wrote:The Cinemag CM-QEE-3440-A audio transformer:
David Geren of Cinemag shipped this out last week, and I was able to get it today, delivered right to my office .... by EMS
I guess i'll be busy this weekend
Jon Agner wrote:The Cinemag SUT assembled and ready to rumble:
Finally, after resoldering loose connections and proper ground termination, I was able to fire up the cinemag SUT last night I can't say yet how the dynamics of this SUT compare with the 4722, but initial impression, I would say they have similar qualities.
Yup, for it's price, it sure mated well with my cart . Time for me to buy another cartridge .
Abe, Doc Jr, - Thanks for posting your impressions on the cinemag SUT..... I'm one happy camper
Cheers
Jon Agner wrote:Yup, Depending on the type of music played, the Red would work well with either the 1:36 or the 1:18. I still have to try out the Denon on the cinemag. We've only tried the denon on the 4722 and 15095A. From what we heard, the 103 seemed to work well with the 1:18 ratio of the 4722.
I'll let this play first for a while before I give this a review. I also re-arranged my listening area thus I'm still aligning the speakers
The two selector switches are for the three-input selection and gain selection. At the moment it's only for the 1:36 and 1:18, but I still have an extra slot for the 1:9, when possible.
I may try to use load resistors in the future, but with the 4722 worked well on my carts w/o the additional load resistors, I guess i'll play this first with them.
Jon Agner wrote:The cinemag on it's new compact casing:
zetroce wrote:A friend gave me a pair of Altec 15095A Line Transformers, which i plan to use as SUT. How can i check if they are still working fine and would be suitable for SUT job? My friend told me that they were used in their Altec Lansing paging system. Any help on this matter would be greatly appreciated.
TIA
zetroce wrote:A friend gave me a pair of Altec 15095A Line Transformers, which i plan to use as SUT. How can i check if they are still working fine and would be suitable for SUT job? My friend told me that they were used in their Altec Lansing paging system. Any help on this matter would be greatly appreciated.
TIA
quarterback wrote:zetroce wrote:A friend gave me a pair of Altec 15095A Line Transformers, which i plan to use as SUT. How can i check if they are still working fine and would be suitable for SUT job? My friend told me that they were used in their Altec Lansing paging system. Any help on this matter would be greatly appreciated.
TIA
iba talaga maganda putol ng pusod.......
zetroce wrote:A friend gave me a pair of Altec 15095A Line Transformers, which i plan to use as SUT. How can i check if they are still working fine and would be suitable for SUT job? My friend told me that they were used in their Altec Lansing paging system. Any help on this matter would be greatly appreciated.
TIA
Jon Agner wrote:zetroce wrote:A friend gave me a pair of Altec 15095A Line Transformers, which i plan to use as SUT. How can i check if they are still working fine and would be suitable for SUT job? My friend told me that they were used in their Altec Lansing paging system. Any help on this matter would be greatly appreciated.
TIA
Ows Parang similar 'yan sa "Hiram"
Kidding aside, naka 15095A din sa To-chi, you can use his casing to test your SUT
Users browsing this forum: No registered users and 8 guests