TAS Twin P100 - finally it's over

Turntables, cartridges, phono-pre, records and analog supplies

Moderator: TheAnalogSource

Re: TAS P100 - Hot roding a Rega P3-24 Project

Postby kabubi » Tue Apr 17, 2012 12:11 am

Gandy Boys Adventure Series

Epilogue: Confessions of the REAL Upgrade King


:rofl: :rofl: :rofl:
User avatar
kabubi
Legend
Legend
 
Posts: 5476
Joined: Wed Oct 26, 2005 6:28 pm

Re: TAS P100 - Hot roding a Rega P3-24 Project

Postby cploogq » Tue Apr 17, 2012 7:56 pm

Nxt tym kwarto na papagawa ko ah and furniture :)
Paglipat ko
cploogq
Citizen
Citizen
 
Posts: 313
Joined: Mon Aug 03, 2009 4:27 pm

Urgent meeting

Postby cploogq » Thu Apr 19, 2012 7:43 am

Image
cploogq
Citizen
Citizen
 
Posts: 313
Joined: Mon Aug 03, 2009 4:27 pm

Re: TAS P100 - Hot roding a Rega P3-24 Project

Postby TheAnalogSource » Thu Apr 19, 2012 10:56 am

everything is in...pulley, plate,footers,arm...hopefully i measured them exactly...should be done by weekend
User avatar
TheAnalogSource
Where beautiful music begins
 
Posts: 7465
Joined: Mon Sep 03, 2007 9:10 am
Location: THE ANALOG SOURCE

Re: Urgent meeting

Postby Dodie » Thu Apr 19, 2012 7:55 pm

cploogq wrote:Image


nag meeting kung sino makakakuha ng cell no nung nasa likod...............and the winner is?..............DRAKO :devil: :devil: kung nandito lang idol PHILPATH ko... :x :x :x :x
Dodie
Citizen
Citizen
 
Posts: 688
Joined: Thu Jan 06, 2011 12:54 am

Re: Urgent meeting

Postby endrik35 » Thu Apr 19, 2012 8:40 pm

Dodie wrote:
cploogq wrote:Image


nag meeting kung sino makakakuha ng cell no nung nasa likod...............and the winner is?..............DRAKO :devil: :devil: kung nandito lang idol PHILPATH ko... :x :x :x :x



The adventures of the Gandy boys
Book 7
Drakko the dragon pulled a fast one over doc GQ Philpath! Whose the better stud? ;) :rofl:
User avatar
endrik35
Fanatic
Fanatic
 
Posts: 1233
Joined: Thu Jul 16, 2009 11:18 pm

Re: TAS P100 - Hot roding a Rega P3-24 Project

Postby philpath » Sat Apr 21, 2012 9:17 pm

AT di kami nakasama ni Doc Endrick diyan sa picture na yan!!!!!!
Dodie wrote:
cploogq wrote:Image


nag meeting kung sino makakakuha ng cell no nung nasa likod...............and the winner is?..............DRAKO :devil: :devil: kung nandito lang idol PHILPATH ko... :x :x :x :x
philpath
Citizen
Citizen
 
Posts: 576
Joined: Sun Jan 18, 2009 1:52 pm

Re: TAS P100 - Hot roding a Rega P3-24 Project

Postby TheAnalogSource » Thu Apr 26, 2012 11:51 am

Image

eto na boss...almost done...just the arm....installed the pulley, plate, and footer.

...syempre dahan dahan dahil first time hehehe
User avatar
TheAnalogSource
Where beautiful music begins
 
Posts: 7465
Joined: Mon Sep 03, 2007 9:10 am
Location: THE ANALOG SOURCE

Re: TAS P100 - Hot roding a Rega P3-24 Project

Postby endrik35 » Fri Apr 27, 2012 7:20 am

TheAnalogSource wrote:Image

eto na boss...almost done...just the arm....installed the pulley, plate, and footer.

...syempre dahan dahan dahil first time hehehe


BIGLAIN mo na brader Nols tutal mambibigla naman mayari niyan eh! :rofl: :devil:
Kung mapadali man at matapos agad, puwede namang ulit ulitin! ;) :devil:

Lagyan na naten ng Dynamat extreme yan!

Image
Image
Image
User avatar
endrik35
Fanatic
Fanatic
 
Posts: 1233
Joined: Thu Jul 16, 2009 11:18 pm

Re: TAS P100 - Hot roding a Rega P3-24 Project

Postby endrik35 » Wed May 02, 2012 8:53 am

While waiting for some news and a call from Noly to audition Philpath's upgraded Rega P3-24, and since it was Labor day(no work), I decided to tweak my Rega P3-24 which I learned from the internet and meet some old friends later in the evening.
I applied sound deadening material(dynamat like. i like the color of black bitumen) on the bottom surface of the platter and also around the spindle and pulley housing. i also constructed a brace made from the same material running from the tonearm assembly down to the spindle housing(copied Rega's brace design :smiley:). Well. I fired it up later and I've noticed a slight increase in detail and bass and slight lowering of the noise floor(although the tt already sits on a wall rack)

Image
Image
Image
Image

Cheers! ;) :)
User avatar
endrik35
Fanatic
Fanatic
 
Posts: 1233
Joined: Thu Jul 16, 2009 11:18 pm

Re: TAS P100 - Hot roding a Rega P3-24 Project

Postby philpath » Thu May 03, 2012 12:52 am

endrik35 wrote:While waiting for some news and a call from Noly to audition Philpath's upgraded Rega P3-24, and since it was Labor day(no work), I decided to tweak my Rega P3-24 which I learned from the internet and meet some old friends later in the evening.
I applied sound deadening material(dynamat like. i like the color of black bitumen) on the bottom surface of the platter and also around the spindle and pulley housing. i also constructed a brace made from the same material running from the tonearm assembly down to the spindle housing(copied Rega's brace design :smiley:). Well. I fired it up later and I've noticed a slight increase in detail and bass and slight lowering of the noise floor(although the tt already sits on a wall rack)

Image
Image
Image
Image

Cheers! ;) :)


YAN ANG TARNTEYBOL!!!! A true blue REGA!!! Biased dahil Tatang Gandy fan ako!!!!! :lol: :lol: :lol: :lol: :lol:
philpath
Citizen
Citizen
 
Posts: 576
Joined: Sun Jan 18, 2009 1:52 pm

Re: TAS P100 - Hot roding a Rega P3-24 Project

Postby endrik35 » Thu May 03, 2012 5:38 am

Thanks klasmeyt! The rega tt is really a highly tweakable turntable and will give you years of listening pleasure! The bitumen increased the rigidity of the plinth aside from absorbing unnecessary and unwanted vibrations though it did not add weight to the rega because it is very light thus preserving tatang Gandys preference for a lighter yet rigid plinth!. Bought 1 large sheet from Mickeys the other day! Next stop will be the double pulley and dual silicon belt from Michael and an audiomods tonearm! Bwahahaha! :D

Image
*I think it looks better without the herbie's mat* :)
User avatar
endrik35
Fanatic
Fanatic
 
Posts: 1233
Joined: Thu Jul 16, 2009 11:18 pm

Re: TAS P100 - Hot roding a Rega P3-24 Project

Postby Dodie » Thu May 03, 2012 12:07 pm

endrik35 wrote:Thanks klasmeyt! The rega tt is really a highly tweakable turntable and will give you years of listening pleasure! The bitumen increased the rigidity of the plinth aside from absorbing unnecessary and unwanted vibrations though it did not add weight to the rega because it is very light thus preserving tatang Gandys preference for a lighter yet rigid plinth!. Bought 1 large sheet from Mickeys the other day! Next stop will be the double pulley and dual silicon belt from Michael and an audiomods tonearm! Bwahahaha! :D

Image
*I think it looks better without the herbie's mat* :)


Ganda doc! :clap: :clap: pa allans ka na bukas. :) :) punta ako ;) ;)
Dodie
Citizen
Citizen
 
Posts: 688
Joined: Thu Jan 06, 2011 12:54 am

Re: TAS P100 - Hot roding a Rega P3-24 Project

Postby cploogq » Thu May 03, 2012 1:21 pm

yon!!!! :clap: :clap:
:beer: :d: :party:
cploogq
Citizen
Citizen
 
Posts: 313
Joined: Mon Aug 03, 2009 4:27 pm

Re: Endrik's P100 - Hot roding a Rega P3-24 Project

Postby TheAnalogSource » Thu May 03, 2012 2:39 pm

changed title...kaw na doc magtapos netong ke philpath.....sobra tamad na ko mag-audio hahaha
User avatar
TheAnalogSource
Where beautiful music begins
 
Posts: 7465
Joined: Mon Sep 03, 2007 9:10 am
Location: THE ANALOG SOURCE

Re: TAS P100 - Hot roding a Rega P3-24 Project

Postby muypogi » Thu May 03, 2012 3:01 pm

endrik35 wrote:Thanks klasmeyt! The rega tt is really a highly tweakable turntable and will give you years of listening pleasure! The bitumen increased the rigidity of the plinth aside from absorbing unnecessary and unwanted vibrations though it did not add weight to the rega because it is very light thus preserving tatang Gandys preference for a lighter yet rigid plinth!. Bought 1 large sheet from Mickeys the other day! Next stop will be the double pulley and dual silicon belt from Michael and an audiomods tonearm! Bwahahaha! :D

Image
*I think it looks better without the herbie's mat* :)



Akin na lang yung mat . . .
muypogi
Fanatic
Fanatic
 
Posts: 1794
Joined: Tue Feb 27, 2007 11:05 am

Re: Endrik's P100 - Hot roding a Rega P3-24 Project

Postby philpath » Thu May 03, 2012 9:25 pm

endrik35 wrote:Thanks klasmeyt! The rega tt is really a highly tweakable turntable and will give you years of listening pleasure! The bitumen increased the rigidity of the plinth aside from absorbing unnecessary and unwanted vibrations though it did not add weight to the rega because it is very light thus preserving tatang Gandys preference for a lighter yet rigid plinth!. Bought 1 large sheet from Mickeys the other day! Next stop will be the double pulley and dual silicon belt from Michael and an audiomods tonearm! Bwahahaha! :D

Image
*I think it looks better without the herbie's mat* :)


Yan ang tama!!! Para akin na lang yan single belt platter ni Michael Lim. YAN ANG MAKATUWIRAN!!!!! :envy: :envy: :envy: :envy:
philpath
Citizen
Citizen
 
Posts: 576
Joined: Sun Jan 18, 2009 1:52 pm

Re: Endrik's P100 - Hot roding a Rega P3-24 Project

Postby philpath » Thu May 03, 2012 9:53 pm

[quote="TheAnalogSource"]changed title...kaw na doc magtapos netong ke philpath.....sobra tamad na ko mag-audio hahaha[/quot]

YAN ANG DI MAKATUWIRAN!!!!!! :'( :'( :'( :'(
philpath
Citizen
Citizen
 
Posts: 576
Joined: Sun Jan 18, 2009 1:52 pm

Re: Endrik's P100 - Hot roding a Rega P3-24 Project

Postby cploogq » Thu May 03, 2012 10:07 pm

Ang hindi makatwiran ay napitol yung GULLWING!!!!!!!!! :@ ;( :swear:
Ayaw ko na mag audio!!!!
cploogq
Citizen
Citizen
 
Posts: 313
Joined: Mon Aug 03, 2009 4:27 pm

Re: Endrik's P100 - Hot roding a Rega P3-24 Project

Postby philpath » Fri May 04, 2012 12:12 am

Bakit naputol ang Gullwing? Pinaglaruan ang karayom? :@ :envy: :fubar:
philpath
Citizen
Citizen
 
Posts: 576
Joined: Sun Jan 18, 2009 1:52 pm

PreviousNext

Return to >> The Analog Source <<

Who is online

Users browsing this forum: No registered users and 7 guests