TASLENCO: some projects done lately-1st qtr 2016

Turntables, cartridges, phono-pre, records and analog supplies

Moderator: TheAnalogSource

Re: TASLENCO: A new plinth study for the double arm

Postby TheAnalogSource » Wed Nov 06, 2013 7:50 am

backlogs :(....was sidelined with something else....should have just concentrated on these....pera na sana haha
Image


back to work....
there is a considerable improvement on the mk2 run from the earlier lencos. however the technical concept cant be implemented easily for a double arm. good thing, recently there is a double arm project. Ive been thinking for a while how to implement the improvements for the double arm system. This is what ive come up with... double plinth :)

....just finished rough cutting the plinth
Image
User avatar
TheAnalogSource
Where beautiful music begins
 
Posts: 7465
Joined: Mon Sep 03, 2007 9:10 am
Location: THE ANALOG SOURCE

Re: TASLENCO: A new plinth study for the double arm

Postby quarterback » Wed Nov 06, 2013 7:59 am

TheAnalogSource wrote:backlogs :(....was sidelined with something else....should have just concentrated on these....pera na sana haha
Image


back to work....
there is a considerable improvement on the mk2 run from the earlier lencos. however the technical concept cant be implemented easily for a double arm. good thing, recently there is a double arm project. Ive been thinking for a while how to implement the improvements for the double arm system. This is what ive come up with... double plinth :)

....just finished rough cutting the plinth
Image


double or single :?: :?:; rectangle or hexagon :?: :?: so many choices too little moolah :( :(
quarterback
Fanatic
Fanatic
 
Posts: 2488
Joined: Fri Jan 09, 2004 9:02 pm

Re: TASLENCO: A new plinth study for the double arm

Postby TheAnalogSource » Wed Nov 06, 2013 8:07 am

hehe this one will take a little while....you have enough time for your placements to mature kuya chito haha
User avatar
TheAnalogSource
Where beautiful music begins
 
Posts: 7465
Joined: Mon Sep 03, 2007 9:10 am
Location: THE ANALOG SOURCE

Re: TASLENCO: A new plinth study for the double arm

Postby quarterback » Wed Nov 06, 2013 8:26 am

TheAnalogSource wrote:hehe this one will take a little while....you have enough time for your placements to mature kuya chito haha


wala ba 6 mos zero interest parang bpi :-) o pledge ng loan proceeds :-) i intend to go on leave after christmas... 8 days audio holiday yun...
quarterback
Fanatic
Fanatic
 
Posts: 2488
Joined: Fri Jan 09, 2004 9:02 pm

Re: TASLENCO: A new plinth study for the double arm

Postby TheAnalogSource » Wed Nov 06, 2013 8:33 am

quarterback wrote:
TheAnalogSource wrote:hehe this one will take a little while....you have enough time for your placements to mature kuya chito haha


wala ba 6 mos zero interest parang bpi :-) o pledge ng loan proceeds :-) i intend to go on leave after christmas... 8 days audio holiday yun...


senior citizen discount pa hehe dba ka crocrosover mo pa lang to dual citizenship

today onward, its all turntable project so i can beat the christmas rush to enjoy the proceeds with the kids hahaha
User avatar
TheAnalogSource
Where beautiful music begins
 
Posts: 7465
Joined: Mon Sep 03, 2007 9:10 am
Location: THE ANALOG SOURCE

Re: TASLENCO: A new plinth study for the double arm

Postby quarterback » Wed Nov 06, 2013 9:08 am

TheAnalogSource wrote:
quarterback wrote:
TheAnalogSource wrote:hehe this one will take a little while....you have enough time for your placements to mature kuya chito haha


wala ba 6 mos zero interest parang bpi :-) o pledge ng loan proceeds :-) i intend to go on leave after christmas... 8 days audio holiday yun...


senior citizen discount pa hehe dba ka crocrosover mo pa lang to dual citizenship

today onward, its all turntable project so i can beat the christmas rush to enjoy the proceeds with the kids hahaha


he he. give me 2 weeks ;) ;)
quarterback
Fanatic
Fanatic
 
Posts: 2488
Joined: Fri Jan 09, 2004 9:02 pm

Re: TASLENCO: A new plinth study for the double arm

Postby TheAnalogSource » Wed Nov 06, 2013 9:13 am

AYT!!! THANKS FOR THE CONFIRMATION kuya ....and now ive just crossover to overbooked hahaha
User avatar
TheAnalogSource
Where beautiful music begins
 
Posts: 7465
Joined: Mon Sep 03, 2007 9:10 am
Location: THE ANALOG SOURCE

Re: TASLENCO: A new plinth study for the double arm

Postby quarterback » Wed Nov 06, 2013 9:24 am

TheAnalogSource wrote:AYT!!! THANKS FOR THE CONFIRMATION kuya ....and now ive just crossover to overbooked hahaha


ilang kilo panga ng tuna kapalit nyan :-)
quarterback
Fanatic
Fanatic
 
Posts: 2488
Joined: Fri Jan 09, 2004 9:02 pm

Re: TASLENCO: Many thanks for presenting our tables

Postby TheAnalogSource » Tue Nov 12, 2013 7:54 am

The Analog Source wishes to thank the following

Room 444 (Dan & Co.)

Room 445 (Val, John, & Co.)

DJs Room (Cocoy Puyat)

for using the TAS turntables in their room. All the best to you all.
User avatar
TheAnalogSource
Where beautiful music begins
 
Posts: 7465
Joined: Mon Sep 03, 2007 9:10 am
Location: THE ANALOG SOURCE

Re: TASLENCO: Many thanks for presenting our tables

Postby Jon Agner » Tue Nov 12, 2013 10:38 am

TAS,

RB250 yung naka install doon sa SL1200's right? Never imagined that those tonearms will suite a DJ's rig :D :D
User avatar
Jon Agner
Legend
Legend
 
Posts: 10567
Joined: Thu Feb 20, 2003 6:48 pm
Location: Sa isang kabukiran na malapit sa tabing dagat

Re: TASLENCO: Many thanks for presenting our tables

Postby TheAnalogSource » Wed Nov 13, 2013 6:49 am

One is a 250. The other is a 251. Cocoy uses an ortofon DJ cart.

I believe more than anything what you get is a better grip with the rb over the stock arm. Very important in DJ environment to lessen resonance from hi spl low frequencies. As for home use, I like that little play for ambiance. Heck, I even hate record clamps hehe
User avatar
TheAnalogSource
Where beautiful music begins
 
Posts: 7465
Joined: Mon Sep 03, 2007 9:10 am
Location: THE ANALOG SOURCE

Re: TASLENCO: Many thanks for presenting our tables

Postby cocoy » Wed Nov 13, 2013 2:26 pm

Actually they are both RB-251's
cocoy
Citizen
Citizen
 
Posts: 55
Joined: Fri Nov 26, 2010 11:36 am

Re: TASLENCO: Many thanks for presenting our tables

Postby Jon Agner » Wed Nov 13, 2013 10:38 pm

Image
User avatar
Jon Agner
Legend
Legend
 
Posts: 10567
Joined: Thu Feb 20, 2003 6:48 pm
Location: Sa isang kabukiran na malapit sa tabing dagat

Re: TASLENCO: DOUBLE ARM DOUBLE PLINTH WIP

Postby TheAnalogSource » Thu Nov 21, 2013 3:58 pm

THE DOUBLE ARM DOUBLE PLINTH PROJECT.
this was sidelined by so many things but hope to get it done soon...
just done with the rough finish, now ready for final sanding and coating...
...but cant wait for the final outcome to post pics.
GEORGEOUS wood grain :)

Image
User avatar
TheAnalogSource
Where beautiful music begins
 
Posts: 7465
Joined: Mon Sep 03, 2007 9:10 am
Location: THE ANALOG SOURCE

Re: TASLENCO: DOUBLE ARM DOUBLE PLINTH WIP

Postby jlooney » Fri Nov 22, 2013 3:21 pm

Noly kailan delivery Ng akin? Hinhintay na kayo nito :)Image


Sent from my iPhone using Tapatalk
jlooney
Citizen
Citizen
 
Posts: 579
Joined: Mon Jul 09, 2012 8:56 am

Re: TASLENCO: DOUBLE ARM DOUBLE PLINTH WIP

Postby dB10 » Fri Nov 22, 2013 3:24 pm

jlooney wrote:Noly kailan delivery Ng akin? Hinhintay na kayo nito :)Image


Sent from my iPhone using Tapatalk


...you really know the best way to catch his attention :lol: advanced congrats !
dB10
Citizen
Citizen
 
Posts: 239
Joined: Tue Dec 18, 2007 3:05 pm

Re: TASLENCO: DOUBLE ARM DOUBLE PLINTH WIP

Postby jlooney » Fri Nov 22, 2013 3:27 pm

Bumibilis si Noly :) parang grease yan haha


Sent from my iPhone using Tapatalk
jlooney
Citizen
Citizen
 
Posts: 579
Joined: Mon Jul 09, 2012 8:56 am

Re: TASLENCO: DOUBLE ARM DOUBLE PLINTH WIP

Postby dnk » Fri Nov 22, 2013 5:14 pm

dB10 wrote:
jlooney wrote:Noly kailan delivery Ng akin? Hinhintay na kayo nito :)Image


Sent from my iPhone using Tapatalk


...you really know the best way to catch his attention :lol: advanced congrats !


pati tuloy mga miron, na-catch din ang attention. hihihi :$ 8)

jun, sasama ako sa delivery!!!
User avatar
dnk
Citizen
Citizen
 
Posts: 572
Joined: Fri Nov 28, 2008 4:17 pm

Re: TASLENCO: DOUBLE ARM DOUBLE PLINTH WIP

Postby jlooney » Fri Nov 22, 2013 6:47 pm

Sure dan! Actually me pustahan kami ni bob sa pacquaio rios so we don't need to wait for nolys delivery :)


Sent from my iPhone using Tapatalk
jlooney
Citizen
Citizen
 
Posts: 579
Joined: Mon Jul 09, 2012 8:56 am

Re: TASLENCO: DOUBLE ARM DOUBLE PLINTH WIP

Postby jlooney » Fri Nov 22, 2013 6:50 pm

jlooney wrote:Sure dan! Actually me pustahan kami ni bob sa pacquaio rios so we don't need to wait for nolys delivery :)


Sent from my iPhone using Tapatalk

Correction: bebop, Wavemaster and triangle :)


Sent from my iPhone using Tapatalk
jlooney
Citizen
Citizen
 
Posts: 579
Joined: Mon Jul 09, 2012 8:56 am

PreviousNext

Return to >> The Analog Source <<

Who is online

Users browsing this forum: No registered users and 5 guests