Page 4 of 6

Re: TAS non-LENCO - Mr. O's Garrard 401

PostPosted: Sun Apr 01, 2012 8:38 pm
by arcam
Pogi!!!

Re: TAS non-LENCO - Mr. O's Garrard 401

PostPosted: Sun Apr 01, 2012 9:42 pm
by endrik35
Nakakatulong laway na garrard! Congrats to Mr. O and Noly! Wanna try a Garrard again someday. They say it has a warmer sound compared to the Lenco. Different strokes for different folks! ;)

Kaya Mr. DINDO of san pedro laguna,kung sakaling nababasa mo yung thread nato, isauli mo na yung garrard at cartridge ko. Its holy week and God will surely forgive if your sincere. . . :^)

Re: TAS non-LENCO - test mounting Mr. O's Garrard 401

PostPosted: Mon Apr 02, 2012 6:38 am
by manila
TheAnalogSource wrote:hayyy salamat natapos din :sweat: :sweat: :sweat:

my first fit of the Jelco 12"... a lot more detail than the SME 3009....as you can see here, the garrards sports a double glider :devil: :devil: :devil:

Image

Image

Image



Ang ganda en grande! :inlove: :inlove:

Re: TAS non-LENCO - Technics SL-120 aka SL1200 mk1

PostPosted: Sun Aug 05, 2012 7:54 am
by TheAnalogSource
Image

Technics SL-120 also known as Technics SL-1200 Mk1 if fitted with the Technics EPA arm.
Just finished fitting this one with an SME3009 arm...a factory recommended arm for this unit as it came with an armboard bored with an SME mount.
Cartridge is Audio Technica AT440MLA.

Im always surprised whenever an odd combination or a new table brings out very good music.
....so it was meant as an audiophile turntable afterall before it caught attention of the DJs :)

Re: TAS non-LENCO - Technics SL-120 aka SL1200 mk1

PostPosted: Sun Aug 05, 2012 10:33 am
by merlin
TheAnalogSource wrote:Image

Technics SL-120 also known as Technics SL-1200 Mk1 if fitted with the Technics EPA arm.
Just finished fitting this one with an SME3009 arm...a factory recommended arm for this unit as it came with an armboard bored with an SME mount.
Cartridge is Audio Technica AT440MLA.

Im always surprised whenever an odd combination or a new table brings out very good music.
....so it was meant as an audiophile turntable afterall before it caught attention of the DJs :)


For sale?

Re: TAS non-LENCO - testrun and final assembly Garrard 6300C

PostPosted: Tue Dec 18, 2012 7:22 am
by TheAnalogSource
testrun and final assembly of a Garrard 63000C.... a few things on my mind now....

1. i wont accept a garrard job next time. daming pyesa :(

2. time to pull out my mom's garrard turntable from our console next time i visit our ancestral home.

Image

Re: TAS non-LENCO - now playing Garrard 6300C

PostPosted: Wed Dec 19, 2012 9:07 am
by TheAnalogSource
now playing after about half a year of work.....didnt imagine how good she sings even with the flimsy arm

Image

Re: TAS non-LENCO - now playing Garrard 6300C

PostPosted: Wed Dec 19, 2012 9:25 am
by sumnerbrowne
TAS does it again! TEAC GF 350 naman!

Re: TAS non-LENCO - my first zebra plinth

PostPosted: Thu Dec 20, 2012 12:50 pm
by TheAnalogSource
i thought im all ready for vacation....a new project just arrived....guess what table this is?

....dito ko na lang nga ibubuntong frustration to sa tas room
Image

Re: TAS non-LENCO - zebra plinth pioneer and more

PostPosted: Wed Jan 16, 2013 8:14 am
by TheAnalogSource
waiting for the armboard.....motor checked and ok....
Image

....also dipping my fingers on this...wish me luck....

Image

Re: TAS non-LENCO - zebra plinth pioneer

PostPosted: Fri Feb 15, 2013 12:18 pm
by TheAnalogSource
me bibilhin akong speaker....kaya tapusin ko na mga pending hehe

Image

Re: TAS non-LENCO - zebra plinth pioneer

PostPosted: Fri Feb 15, 2013 1:17 pm
by dnk
TheAnalogSource wrote:me bibilhin akong speaker....kaya tapusin ko na mga pending hehe


Working overtime! :rock:

Re: TAS non-LENCO - zebra plinth pioneer

PostPosted: Fri Feb 15, 2013 2:59 pm
by kabubi
TheAnalogSource wrote:me bibilhin akong speaker....kaya tapusin ko na mga pending hehe

Image



JBL 4434 or 4430?

Re: TAS non-LENCO - zebra plinth pioneer

PostPosted: Fri Feb 15, 2013 4:58 pm
by philpath
kabubi wrote:
TheAnalogSource wrote:me bibilhin akong speaker....kaya tapusin ko na mga pending hehe

Image



JBL 4434 or 4430?


BIG SPEAKERS FOR A BIG HEARTED MAN!!!!! Attaboy, Yan ang mga speakers na bagay diyan sa Audio Room mo!!!! Not those puny bookshelves that I use or small puny floorstanders!!!! :devil: :devil: :devil: :devil: :devil: Let us throw JBL L300's into the mix!!!!! :devil: :devil: :devil: :devil: :devil: :devil: :devil: :devil:

Re: TAS non-LENCO - zebra plinth pioneer

PostPosted: Fri Feb 15, 2013 7:03 pm
by TheAnalogSource
4508/2360....kaw pinaka me kasalanan nito philpath hehehe

Re: TAS non-LENCO - zebra plinth pioneer

PostPosted: Fri Feb 15, 2013 7:19 pm
by doasmarx
ganito yan diba:
4508 cabinet
2360 torotot

Image

Re: TAS non-LENCO - zebra plinth pioneer

PostPosted: Fri Feb 15, 2013 11:32 pm
by kabubi
Noly beybs,

go for it!

i remember when you were at the house and you enthused about the sound of a 2 way JBL 4430 you heard in White Plains. well, these critters being goaded to you by these sulsultants are close relatives. the 2360 bi radial horns remind me of momma cheek horns cast in stone by Rollie Vicencio. the venerable Lin Gomez will most probably tell you that these bi-radial horns are good for near field listening because of their dispersion. just don't walk close to them when your drunk because you may wind up sodomizing them :rofl: :rofl: :rofl:

doasmarx wrote:ganito yan diba:
4508 cabinet
2360 torotot

Image

Re: TAS non-LENCO - zebra plinth pioneer

PostPosted: Sat Feb 16, 2013 10:16 am
by TheAnalogSource
actually if im not mistaken, lin highly recommends rolly for the concrete cheek of the tweeter option. im poor in math so i cant remember the number. but im leaning towards that slot tweeter...ang pino.


btw, ive been sober for quite a while now hahaha

Re: TAS non-LENCO - zebra plinth pioneer

PostPosted: Sat Feb 16, 2013 10:25 am
by merlin
TheAnalogSource wrote:actually if im not mistaken, lin highly recommends rolly for the concrete cheek of the tweeter option. im poor in math so i cant remember the number. but im leaning towards that slot tweeter...ang pino.


btw, ive been sober for quite a while now hahaha


Paano naging poor in math ang board topnotcher ng chem eng? ;)

Re: TAS non-LENCO - zebra plinth pioneer

PostPosted: Sat Feb 16, 2013 11:23 am
by dnk
merlin wrote:Paano naging poor in math ang board topnotcher ng chem eng? ;)


baka dahil sa kakalanghap ng chemicals. hehehe :geek: :geek: :geek:

here is the actual picture of Nolyboy's target: (also posted at The Pampanga Connection thread)

Image

Lin actually made a platform between the horn bracket and the woofer cabinet to provide space for a tweeter. Since the 2360 is bi-radial, the ideal candidate for tweeter should have been the baby cheek, but I too would attest to the heavenly sound of the slot, not to be confused with the one spelled with a U instead of O.