Page 1 of 1

From the TAS LAB: LASERDISC ANTISKATE ADAPTER

PostPosted: Mon Aug 09, 2010 10:43 am
by TheAnalogSource
LASERDISC ANTISKATE ADAPTER
Image

I have all test equipment for a proper turntable setup except for the antiskate setting. It's been told to use a laser disc to set bias but sometimes its very difficult to center it in the platter.
If i remember correct there is no antiskate setting device commercial available except maybe for the Fozgometer though it has a few more variables.

This is a more direct approach to set your turntable bias.

FOR SALE for only P200.00 each.


*******************************************************************
the analog source STYLUS CLEANER
formulated with superglide formula. reduces friction and drag between your vinyl groove and the stylus. giving you increase soundstage and definition.

Image
P500.00

Re: from TAS LAB: LASERDISC ANTISKATE ADAPTER

PostPosted: Thu Mar 20, 2014 7:24 pm
by TheAnalogSource
LASERDISC ANTISKATE ADAPTER
Image

I have all test equipment for a proper turntable setup except for the antiskate setting.
It's been told to use a laser disc to set bias but sometimes its very difficult to center it in the platter.
If i remember correct there is no antiskate setting device commercial available except maybe for the Fozgometer though it has a few more variables.

This is a more direct approach to set your turntable bias.

FOR SALE for only P200.00 each.

HOW TO USE:
1. PLACE ON SPINDLE AS SHOWN
Image

2. ADD YOUR LASER DISC
Image

3. ADJUST YOUR BIAS
use your old laser disc for setting antiskate (bias). place needle about halfway from spindle to end of disc. at 0 antiskate, the stylus will skate in. at max antiskate, the stylus will skate out. try and find value where the tonearm will not move inward or outward or atmost move inward very slowly.


Re: From the TAS LAB: LASERDISC ANTISKATE ADAPTER

PostPosted: Thu Mar 20, 2014 7:40 pm
by Voltraizer
bro noly, pareserve ng isang laserdisc antiskate adapter.
yun stylus cleaner nagreserve ako dati. sabay kunin ko na rin

Re: From the TAS LAB: LASERDISC ANTISKATE ADAPTER

PostPosted: Thu Mar 20, 2014 7:42 pm
by TheAnalogSource
pare meron ke bob nun stylus cleaner....dun ko na din etong antiskate adapter. thanks thanks bro

Re: From the TAS LAB: LASERDISC ANTISKATE ADAPTER

PostPosted: Thu Mar 20, 2014 7:43 pm
by Voltraizer
TheAnalogSource wrote:pare meron ke bob nun stylus cleaner....dun ko na din etong antiskate adapter. thanks thanks bro

ok bro. thanks

Re: From the TAS LAB: LASERDISC ANTISKATE ADAPTER

PostPosted: Thu Mar 20, 2014 7:50 pm
by JackD201
Very inventive! :clap: :clap: :clap:

Re: From the TAS LAB: LASERDISC ANTISKATE ADAPTER

PostPosted: Thu Mar 20, 2014 7:54 pm
by TheAnalogSource
JackD201 wrote:Very inventive! :clap: :clap: :clap:


thanks Jack.....out of necessity as they say :)

Re: From the TAS LAB: LASERDISC ANTISKATE ADAPTER

PostPosted: Thu Mar 20, 2014 9:51 pm
by Bebop
TheAnalogSource wrote:pare meron ke bob nun stylus cleaner....dun ko na din etong antiskate adapter. thanks thanks bro



sold out na master noly :D
need more supplies 8)

Re: From the TAS LAB: LASERDISC ANTISKATE ADAPTER

PostPosted: Thu Mar 20, 2014 10:02 pm
by hearhead
Bebop wrote:
TheAnalogSource wrote:pare meron ke bob nun stylus cleaner....dun ko na din etong antiskate adapter. thanks thanks bro



sold out na master noly :D
need more supplies 8)


Oo nga isa ako sa mga nang i istorbo kay Bob para sa Stylus Cleaner :D

Re: From the TAS LAB: LASERDISC ANTISKATE ADAPTER

PostPosted: Fri Mar 21, 2014 11:44 am
by TheAnalogSource
added actual bias setting video

Re: From the TAS LAB: LASERDISC ANTISKATE ADAPTER

PostPosted: Fri Mar 21, 2014 2:00 pm
by jamants
TheAnalogSource wrote:added actual bias setting video


this is so cool Noly!!! can you send some to the shop?

Re: From the TAS LAB: LASERDISC ANTISKATE ADAPTER

PostPosted: Fri Mar 21, 2014 6:28 pm
by 99khan
Please reserve one for me Noly. I'll see you next week when I bring my turntable(s). :) Thanks!

Re: From the TAS LAB: LASERDISC ANTISKATE ADAPTER

PostPosted: Sun Mar 23, 2014 11:55 am
by Mamimili
I kept one laserdisc, now i know why!
Thanks Noly :clap: :clap:

Re: From the TAS LAB: LASERDISC ANTISKATE ADAPTER

PostPosted: Mon Mar 24, 2014 11:12 am
by TheAnalogSource
thanks Nick,Paul....well to tell you frankly, i just need one for myself but had a few extra made just in case some of you find it useful.

Re: From the TAS LAB: LASERDISC ANTISKATE ADAPTER

PostPosted: Tue Mar 25, 2014 9:53 pm
by choyb
Hi Noly,
Please reserve for me.
Cheers