WiredState Audio Community

I have a MC 275 and i am planning on changing my 12ax7 tubes.

Any suggestions on what to replace them with? ... are there mid range tubes that will improve / add mids to my set up? i find the highs really high. i have Tungsol 12ax7s installed as of the moment..

hope to hear your suggestions

Try visiting this website: http://www.tubeworld.com

You can check out the sonic descriptions of the various 12ax7's there. Have fun!

psvane tubes..

Do you guys know where i can get a set of 3 12ax7s?

i am currently looking at the EI12ax7 Cryo tubes
Shugang 12ax7 Psvane tubes
Electro Harmonics 12ax7 tubes..

are these available locally??

12AX7 fron DEECO; viewtopic.php?f=11&t=25874

retsckor wrote:Do you guys know where i can get a set of 3 12ax7s?

i am currently looking at the EI12ax7 Cryo tubes
Shugang 12ax7 Psvane tubes
Electro Harmonics 12ax7 tubes..

are these available locally??

retsckor wrote:Do you guys know where i can get a set of 3 12ax7s?

i am currently looking at the EI12ax7 Cryo tubes
Shugang 12ax7 Psvane tubes
Electro Harmonics 12ax7 tubes..

are these available locally??

Shuguang and Electro Harmonix tubes are available at Audio Amplified in libis, QC.

Please call 395-5115 / 738-6002 for inquiries.

retsckor wrote:Do you guys know where i can get a set of 3 12ax7s?

i am currently looking at the EI12ax7 Cryo tubes
Shugang 12ax7 Psvane tubes
Electro Harmonics 12ax7 tubes..

are these available locally??

there is a recent thread here: viewtopic.php?f=11&t=25874

deeco sells these tubes for 350 pesos each.....

the mc275 is a high open loop design and lots of feedback. it was designed to maintain its quality even as tubes ages, i am not sure it will respond well to tube rolling......

Thank you for the replies...

im actually using an MX110 as my pre-amp and using the 275 as my power Amp... will changing the tubes on the pre-amp stage be better, than changing the tubes on my power amp?