Page 5 of 5

Re: Local Tubes and DIY Parts Sources

PostPosted: Wed Dec 07, 2011 11:56 am
by tony
bosing214 wrote:how much po ba the cheapest project, single ended lang muna po try ko lang....and thanks po sa mga nag -reply


5k, 13fm7 pasok dyan......basa ka rito: http://www.electronicslab.ph/forum/inde ... ic=25478.0

Re: Local Tubes and DIY Parts Sources

PostPosted: Thu Dec 08, 2011 11:26 pm
by bosing214
Sir Tony,
tnx a lot for giving more info.sa totoo lang po i have no idea about vacuum tube familiar kc ako sa transistorized amplifier, sundan kita sir sa sight na post mo.

Re: Local Tubes and DIY Parts Sources

PostPosted: Tue Jun 26, 2012 8:51 am
by Quiel
saan kaya maka source nang aluminum plates, 1/2 inch thick (or bit thinner). mga 10 x 15". Need a pair for baffle project. So far, Royal Bender wala daw ganung material. Salamat.

Re: Local Tubes and DIY Parts Sources

PostPosted: Tue Jun 26, 2012 1:19 pm
by edrel sison
Quiel wrote:saan kaya maka source nang aluminum plates, 1/2 inch thick (or bit thinner). mga 10 x 15". Need a pair for baffle project. So far, Royal Bender wala daw ganung material. Salamat.


i think i have that in my factory but i do not cut. you need to find someone who can do the precise cutting. send me pm if interested :)

Re: Local Tubes and DIY Parts Sources

PostPosted: Wed Jun 27, 2012 10:16 am
by Quiel
edrel sison wrote:
Quiel wrote:saan kaya maka source nang aluminum plates, 1/2 inch thick (or bit thinner). mga 10 x 15". Need a pair for baffle project. So far, Royal Bender wala daw ganung material. Salamat.


i think i have that in my factory but i do not cut. you need to find someone who can do the precise cutting. send me pm if interested :)


Yehey. THANK YOU. PM sent.

Re: Local Tubes and DIY Parts Sources

PostPosted: Fri Jun 29, 2012 7:42 am
by tony
Quiel wrote:saan kaya maka source nang aluminum plates, 1/2 inch thick (or bit thinner). mga 10 x 15". Need a pair for baffle project. So far, Royal Bender wala daw ganung material. Salamat.


Sulimco metals, corner cm recto street, and buenabidez in binondo area, they can cut to size, they even have 25mm plates....

me cantact info ka ng royal bender? ano services nila?

Re: Local Tubes and DIY Parts Sources

PostPosted: Sat Jul 28, 2012 7:33 pm
by Quiel
tony wrote:
Quiel wrote:saan kaya maka source nang aluminum plates, 1/2 inch thick (or bit thinner). mga 10 x 15". Need a pair for baffle project. So far, Royal Bender wala daw ganung material. Salamat.


Sulimco metals, corner cm recto street, and buenabidez in binondo area, they can cut to size, they even have 25mm plates....

me cantact info ka ng royal bender? ano services nila?


Thanks Tony.

Royal Bender: pag napadaan ako, kunin ko para sa you. Services based sa nakita ko: bending of tubes, stainless metal fabrication (railings, holders, racks), kasama na din pag manufacture nung containers at mga roof gutters.

Re: Local Tubes and DIY Parts Sources

PostPosted: Mon Oct 08, 2012 11:38 pm
by oyiedelapaz
Bro san yung royal bender? Di ko magoogle eh :rofl:

Re: Local Tubes and DIY Parts Sources

PostPosted: Fri Oct 19, 2012 6:09 pm
by AAudio
Hello sirs,

May nakaka-alam po ba ng contact number ni John Poscablo

Thanks

Re: Local Tubes and DIY Parts Sources

PostPosted: Fri Oct 19, 2012 9:22 pm
by endrik35
AAudio wrote:Hello sirs,

May nakaka-alam po ba ng contact number ni John Poscablo

Thanks


09228277301. Or pm juan bote of pDVD. That's his handle:-)

Re: Local Tubes and DIY Parts Sources

PostPosted: Sun Oct 21, 2012 8:55 pm
by AAudio
thanks sir endrik

Re: Local Tubes and DIY Parts Sources

PostPosted: Tue Nov 05, 2013 11:58 pm
by Ponggoy
Hello Bros, naghahanap ako ng 12X4 para sa rectifier ng PAS3, baka may alam kayong source. Salamat

Re: Local Tubes and DIY Parts Sources

PostPosted: Wed Nov 06, 2013 6:44 am
by tony
Ponggoy wrote:Hello Bros, naghahanap ako ng 12X4 para sa rectifier ng PAS3, baka may alam kayong source. Salamat


try mo kay Gerry Sta MaRIA, 5237551, or sa Watson sa Raon, Pacific Electronics malapit sa deeco...

Re: Local Tubes and DIY Parts Sources

PostPosted: Wed Nov 06, 2013 10:28 pm
by Ponggoy
Salamat Bro.

Re: Local Tubes and DIY Parts Sources

PostPosted: Wed Sep 16, 2015 1:13 pm
by marcoharder
Where can I find axial electrolytics, octal sockets, and other tube amp hardware? I'm currently restoring some guitar amps kasi. Salamat!