Page 4 of 5

Re: Local Tubes and DIY Parts Sources

PostPosted: Sat Jul 11, 2009 6:55 am
by TheAnalogSource
thank obi,arnold,nicole for the leads. :)

Re: Local Tubes and DIY Parts Sources

PostPosted: Thu Jul 16, 2009 4:25 pm
by Quiel
anyone knows where to source 11 or 12 pin socket and plug for use in an umbilical cord? need a pair lg naman sana. would prefer the bigger pins (like those octals for el34's and not miniatures noval for 12ax7). salamat.

Re: Local Tubes and DIY Parts Sources

PostPosted: Thu Jul 16, 2009 4:29 pm
by arnoldc
Quiel, Farnell and RS Components. I'm not sure about Audiophile, you may have to go to Paco or call them.

Re: Local Tubes and DIY Parts Sources

PostPosted: Wed Jul 29, 2009 10:54 am
by Quiel
Thanks but No luck from local sources. ;( Have to find a pair abroad.

Re: Local Tubes and DIY Parts Sources

PostPosted: Tue Aug 04, 2009 5:59 am
by siore
obi wrote:silver strings...

dami nicey nicey parts.

there's this shop fronting deeco (raon). mars something yung shop name...

elecom also carries semi-exotic stuff (it's on the street parallel to raon; left side when you're at raon)...may tubes din sila


Well I've been to Raon yesterday, extensively hunting for 6L6GCs. Only place that has them is Deeco. National tubes at P800 a piece. Golden Mars doesn't have tubes, but understandably some parts can be sourced there. Elecom has some tubes, but not the ones I'm looking for. Kinetic in Pioneer only had Tungsols in stock last time I went around a month ago. JJs can be ordered online at epektos.com...

I don't seem to have too many choices if I want to get local. :sweat:

Re: Local Tubes and DIY Parts Sources

PostPosted: Wed Sep 09, 2009 3:38 pm
by inuitdream
hi folks,

anyone know what the name and contact of that store in Robinson's Pioneer that sells Tubes? :)

Re: Local Tubes and DIY Parts Sources

PostPosted: Wed Sep 09, 2009 3:39 pm
by Jon Agner
inuitdream wrote:hi folks,

anyone know what the name and contact of that store in Robinson's Pioneer that sells Tubes? :)


Kinetic Technologies a.k.a AMX

I think they have their own thread in the dealer's forum :)

Re: Local Tubes and DIY Parts Sources

PostPosted: Wed Sep 09, 2009 3:53 pm
by inuitdream
Jon Agner wrote:
inuitdream wrote:hi folks,

anyone know what the name and contact of that store in Robinson's Pioneer that sells Tubes? :)


Kinetic Technologies a.k.a AMX

I think they have their own thread in the dealer's forum :)



Thanks!!! :) Buying tubes for an old guitar amp.

Re: Local Tubes and DIY Parts Sources

PostPosted: Wed Jul 07, 2010 8:18 am
by gobingo
Good day to all!

Saan tayo maka sources out nitong vacuum Tube 6SL7 and 6SN7 Thank you!

Re: Local Tubes and DIY Parts Sources

PostPosted: Wed Jul 07, 2010 9:55 am
by Jon Agner
gobingo wrote:Good day to all!

Saan tayo maka sources out nitong vacuum Tube 6SL7 and 6SN7 Thank you!


Check the market place forum from time to time ;)

auricap 10uf

PostPosted: Sat Aug 07, 2010 10:02 am
by sonnysin168
If there are members who have 2 pcs of this, I am currently in need. Silver Strings doesn't have these in their inventory. I can be reached at 09178339099. Thanks.

Re: Local Tubes and DIY Parts Sources

PostPosted: Wed Aug 25, 2010 4:57 pm
by AudioAmp
AUDIO AMPLIFIED

- Mundorf capacitors,crossover,head caps, silver leads and cables www.mundorf.com
- LOK/Homegrown Audio RCA www.homegrownaudio.com
- Belden, Xindak wires, cables and sleeves
- Various tubes

We also have an in house technician to assist you with your needs or queries

www.audioamplified.com

Re: Local Tubes and DIY Parts Sources

PostPosted: Thu Aug 26, 2010 8:40 am
by brady
can you post prices for your wires from homegrown? TIA

Re: Local Tubes and DIY Parts Sources

PostPosted: Thu Aug 26, 2010 10:58 am
by Noel_14
brady wrote:can you post prices for your wires from homegrown? TIA


Brady sent you PM :)

cheers

Re: Local Tubes and DIY Parts Sources

PostPosted: Mon Sep 13, 2010 10:29 am
by pie-key
puwede po magtanong ng price dito?

EL34?
7199 matched pair?

kahit price range lang po.... and shops i could find these

Re: Local Tubes and DIY Parts Sources

PostPosted: Sun Dec 04, 2011 9:21 pm
by bosing214
Sir ,
gud pm po I'm a new member of this forum, ask ko lang po san po ako makakabili ng tube amplifier diagram for the project, pede po ba kit na ang bibilhin ko at magkano po per kit? low wattage lang sir para mura and suitable for beginner
julius

Re: Local Tubes and DIY Parts Sources

PostPosted: Sun Dec 04, 2011 9:24 pm
by tony
bosing214 wrote:Sir ,
gud pm po I'm a new member of this forum, ask ko lang po san po ako makakabili ng tube amplifier diagram for the project, pede po ba kit na ang bibilhin ko at magkano po per kit? low wattage lang sir para mura and suitable for beginner
julius



kung tube amplifier diagram, hindi mo na kailangan bumile, karamihan naidadownload na sa internet ngayon........ano nga ba ang balak mong gawin?

Re: Local Tubes and DIY Parts Sources

PostPosted: Mon Dec 05, 2011 10:42 am
by Octaver
bosing214 wrote:Sir ,
gud pm po I'm a new member of this forum, ask ko lang po san po ako makakabili ng tube amplifier diagram for the project, pede po ba kit na ang bibilhin ko at magkano po per kit? low wattage lang sir para mura and suitable for beginner
julius

Added to Sir Tony's Question: Tube Amplifier

1. Push Pull (PP) or Single Ended (SE)?
2. Integrated or Power?
3. Your prefered Tubes like EL34, 300B etch...
4. Your Budget? :devil:

Re: Local Tubes and DIY Parts Sources

PostPosted: Mon Dec 05, 2011 11:28 am
by kabubi

Re: Local Tubes and DIY Parts Sources

PostPosted: Tue Dec 06, 2011 10:18 pm
by bosing214
how much po ba the cheapest project, single ended lang muna po try ko lang....and thanks po sa mga nag -reply